Ford 2003 Mustang Workshop Manual page 443

SECTION 205-02C: Rear Drive Axle/Differential — Ford 8.8-Inch IRS
IN-VEHICLE REPAIR
Pinion Seal
Special Tool(s)
Installer, Drive Pinion Oil Seal
205-133 (T79P-4676-A)
Removal
1. Remove the pinion flange (4851). For additional information, refer to
section.
2. Force up the metal flange of the rear axle drive pinion seal (4676).
Install gripping pliers and strike with a hammer to remove the seal.
Installation
1. Lubricate the new rear axle drive pinion seal.
Use Premium Long-Life Grease XG-1-C or equivalent meeting Ford specification ESA-
M1C75-B.
2. CAUTION: Installation without the proper tool can result in early seal failure.
2003 Mustang Workshop Manual
Drive Pinion Flange in this