Ford 2003 Mustang Workshop Manual page 1023

9. Connect the A/C manifold and tube assembly. For additional information, refer to
03 .
10. Install the accessory drive belt. For additional information, refer to
11. Install the push rods. For additional information, refer to
12. Install the lower intake manifold. For additional information, refer to
section.
13. Install the RH exhaust manifold. For additional information, refer to
section.
14. Connect the battery ground cable. For additional information, refer to
15. CAUTION: Correct cooling system bleeding is critical for correct engine cooling.
Fill and bleed the engine cooling system. For additional information, refer to
16. Recharge the A/C refrigerant system. For additional information, refer to
Section 303-05
Push Rod in this section.
Lower Intake Manifold
Exhaust Manifold RH
Section 414-01
Section 303-03A
Section 412-00
Section 412-
.
in this
in this
.
.
.