Ford 2003 Mustang Workshop Manual page 355

5. NOTE: If necessary, use Rust Penetrant and Inhibitor F2AZ-19A501-A meeting Ford
specification ESR-M99C56-A to loosen the sensor for removal.
Remove the rear anti-lock brake sensors from the rear disc brake adapters. For additional
information, refer to
6. CAUTION: Index-mark the brake discs and the wheel studs prior to brake disc
removal.
CAUTION: Do not allow the calipers to hang from the brake hoses.
Remove the rear brake discs. For additional information, refer to
7. CAUTION: Secure the differential housing (4010) to the jack with a suitable strap.
Support the differential housing with a suitable hi-lift jack.
Section 206-09A .
Section 206-04 .