Ford 2003 Mustang Workshop Manual page 183

10. Position the intermediate shaft and install the bolt.
11. Connect the stabilizer bar link to the front suspension lower arm.
1. Install the link and bushing.
2. Install the nut.
12. Connect the tie-rod end to the spindle.
1. Install the tie-rod end into the spindle.
2. Install the nut.
3. Install a new cotter pin.
13. Install the wheel and tire assembly. For additional information, refer to
14. Lower the vehicle.
15. Check wheel alignment. Adjust if necessary. For additional information, refer to
Section 204-04 .
Section 204-00 .