Ford 2003 Mustang Workshop Manual page 1109

4 9A425
53. NOTE: If the lower intake manifold is not secured within four minutes, the sealant must be
removed and the sealing area cleaned with metal surface cleaner. Allow to dry until there is no
sign of wetness, or four minutes, whichever is longer. Failure to follow this procedure can cause
future oil leakage.
Install the lower intake manifold front and rear end seals.
1. Apply a bead of silicone gasket and sealant to the intake manifold front and rear end seal
mounting points as indicated.
2. Install the lower intake manifold front and rear end seals.
54. Install the intake manifold gaskets.
55. NOTE: If the lower intake manifold is not secured within four minutes, the sealant must be
removed and the sealing area cleaned with metal surface cleaner. Allow to dry until there is no
sign of wetness, or four minutes, whichever is longer. Failure to follow this procedure can cause
future oil leakage.
Position the lower intake manifold.
1. Apply a bead of silicone gasket and sealant to the lower intake manifold mounting at the
points indicated.
2. Position the lower intake manifold.
Intake manifold front end seal (part of 9439)