Ford 2003 Mustang Workshop Manual page 246

SECTION 204-02: Rear Suspension
REMOVAL AND INSTALLATION
Damper
Removal
CAUTION: Suspension fasteners are critical parts because they affect performance of vital
components and systems and their failure can result in major service expense. A new part with
the same part number must be installed if installation becomes necessary. If substitution is
necessary, the part must be of the same finish and property class. Torque values must be used
as specified during reassembly to make sure of correct retention of these parts.
1. Raise the vehicle. For additional information, refer to
2. Remove the wheel and tire assembly. For additional information, refer to
3. Disconnect the damper from the axle.
1. Remove the bolt.
2. Disconnect the damper.
4. Remove the damper.
1. Remove the nut.
2. Remove the outer washer.
3. Remove the damper.
Installation
1. Make sure the inner washer is positioned on the stud.
2003 Mustang Workshop Manual
Section 100-02 .
Section 204-04 .