Ford 2003 Mustang Workshop Manual page 867

Hide thumbs Also See for 2003 Mustang:

Table of Contents

SECTION 303-00: Engine System — General Information

GENERAL PROCEDURES

Camshaft End Play —OHC Engines

Special Tool(s)

Dial Indicator Gauge with

Holding Fixture

100-002 (TOOL-4201-C) or

1. Remove the roller followers. Refer to the appropriate section in Group

2. Use a Dial Indicator Gauge with Holding Fixture to measure camshaft end play.

3. Position the camshaft to the rear of the cylinder head.

4. Zero the indicator.

5. Move the camshaft to the front of the cylinder head. Note and record the camshaft end play.

If camshaft end play exceeds specifications, install new camshaft and recheck end play.

Refer to the appropriate section in Group

If camshaft end play exceeds specification after camshaft installation, install a new

cylinder head. Refer to the appropriate section in Group

2003 Mustang Workshop Manual

for the procedure.

for the procedure.

for the procedure.

Show Quick Links

Table of Contents