8. Remove the following components:
1. spring cover
2. spring
3. washer
4. key plate
5. push rod
6. strut pin
7. push rod O-ring
9. Remove and discard the O-ring seal from the push rod.
10. Remove the parking brake lever (2A637).
1. Remove the parking brake return spring (2456).
2. Remove the limiting bolt (2A795).
3. Remove the parking brake lever.
4. Remove the parking brake lever shaft seal from the caliper bore.
Assembly
1.
CAUTION: Do not reuse piston seals or dust boots. Install new seals or dust boots
or damage to the vehicle can occur.