SECTION 204-00: Suspension System — General Information
GENERAL PROCEDURES
Toe Adjustment —Front
1. Start the engine and center the steering wheel.
2. Turn the engine off, and hold the steering wheel in the straight forward position by attaching a
rigid link from the steering wheel to the seat.
3. Check the toe settings. Follow the manufacturer's instructions.
4. Remove the clamps.
5. Loosen the nuts.
Clean and lubricate the nut(s) and front wheel spindle tie-rod threads.
6. NOTE: Do not allow the steering gear bellows to twist when the front wheel spindle tie-rod
(3280) is rotated.
Rotate the front wheel spindle tie-rods.
2003 Mustang Workshop Manual