Ford 2003 Mustang Workshop Manual page 457

24. Connect the parking brake cable and conduit to the caliper and parking brake lever. For
additional information, refer to
25. Repeat the three previous steps for the brake components on the other side of the vehicle.
26. Install the exhaust system. For additional information, refer to
27. Install the wheels and tires. For additional information, refer to
28. CAUTION: If refilling the rear axle (4001), first add 118 ml (4 oz) of Additive Friction
Modifier C8AZ-19B546-A or equivalent meeting Ford specification EST-M2C118-A.
Check the lubricant level.
If necessary, fill the rear axle housing to the level shown with SAE 75W- 140 High
Performance Rear Axle Lubricant F1TZ-19580-B or equivalent meeting Ford
specification WSL-M2C192-A. The refill capacity is 1.23-1.37 liters (2.6-2.9 pints).
29. Lower the vehicle.
30. Check, and adjust the wheel alignment as necessary. For additional information, refer to
Section 204-00 .
Section 206-05 .
Section 309-00 .
Section 204-04 .