Ford 2003 Mustang Workshop Manual page 212

Hide thumbs Also See for 2003 Mustang:

Table of Contents

6. Remove the stabilizer bar (5A772) with the stabilizer bar bushings (5493).

Installation

1. NOTE: The stabilizer bar bracket bolts and the nuts on the stabilizer bar links are of a torque

prevailing design. New bolts and nuts must be used during installation.

NOTE: To install the stabilizer bar link nuts, first install the nuts until snug using the hex holding

feature to prevent the stabilizer bar link ball joint from turning. Final tighten the nuts using a

socket and a torque wrench.

To install, reverse the removal procedure.

Show Quick Links

Table of Contents