Ford 2003 Mustang Workshop Manual page 583

SECTION 206-04: Rear Disc Brake
REMOVAL AND INSTALLATION
Pads
Special Tool(s)
Rear Caliper Piston Adjuster
206-026 (T87P-2588-A)
Removal
1. Use a suitable suction device to lower the brake fluid level in the master cylinder reservoir.
2. Raise and support the vehicle. For additional information, refer to
3. Remove the wheel and tire assembly. For additional information, refer to
4. Inspect the pads for wear or contamination, install new if worn to or past specification.
5. CAUTION: Do not allow the rear disc brake caliper (2552) to hang from the rear
wheel brake hose (2A442).
Remove the rear disc brake caliper bolts and position the caliper aside.
6. Remove the brake pads.
2003 Mustang Workshop Manual
Section 100-02 .
Section 204-04 .