Ford 2003 Mustang Workshop Manual page 572

SECTION 206-03: Front Disc Brake
DISASSEMBLY AND ASSEMBLY
Caliper
Disassembly
1. Remove the disc brake caliper (2B120). For additional information, refer to
section.
2. Drain the remaining brake fluid from disc brake caliper.
3. Apply low air pressure to the fluid port in the disc brake caliper.
1. Place a block of wood between the caliper bridge and the caliper pistons (2196).
2. Apply low air pressure to the fluid port in the disc brake caliper and force out the caliper
pistons to the block of wood.
4. Remove the caliper pistons.
1. Remove the block of wood.
2. Remove the caliper pistons.
5. Remove and discard the piston seals and boots.
2003 Mustang Workshop Manual
Caliper in this