Ford 2003 Mustang Workshop Manual page 761

SECTION 211-02: Power Steering
REMOVAL AND INSTALLATION
Hose
Special Tool(s)
Installer Set, Teflon Seal
211-D027 (D90P-3517-A) or
equivalent
Removal and Installation
CAUTION: While servicing the power steering system, make sure to plug all open hoses,
line fittings, and fluid ports to prevent the entry of contaminants or premature failure of the
power steering components can result.
1. Refer to the System View illustration in Description and Operation for the hose routing and
retention points.
2. When connecting a fitting with a seal ring, a new seal ring must be installed.
The special tool is used to install the return line connector seal and the pressure line
connector seal.
3. Fill, purge and leak check the system. For additional information, refer to
2003 Mustang Workshop Manual
Section 211-00 .