Ford 2003 Mustang Workshop Manual page 973

SECTION 303-01A: Engine — 3.8L
IN-VEHICLE REPAIR
Crankshaft Pulley
Special Tool(s)
Remover, Crankshaft Vibration
Damper
303-009 (T58P-6316-D)
Remover, Crankshaft Vibration
Damper
303-176 (T82L-6316-B)
Installer, Crankshaft
Damper/Crankshaft Front Oil
Seal
303-175 (T82L-6316-A)
Material
Item
Silicone Gasket and Sealant
F7AZ-19554-EA or equivalent
Removal
1. Remove the drive belt (8620). For additional information, refer to
2. Remove the radiator coolant recovery reservoir (8A080).
3. Raise the vehicle on a hoist. For additional information, refer to
4. Remove the crankshaft pulley bolt.
Specification
WSE-M4G323-A4
2003 Mustang Workshop Manual
Section 303-05 .
Section 100-02 .