Ford 2003 Mustang Workshop Manual page 793

SECTION 211-04: Steering Column
REMOVAL AND INSTALLATION
Column
Removal and Installation
All vehicles
1. Disconnect the battery ground cable and wait at least one minute to allow the depletion of the
restraint system backup power supply. For additional information, refer to
2. WARNING: To avoid the risk of serious personal injury, follow all warnings,
cautions, notes and instructions at the beginning of the deactivation procedure.
Deactivate the supplemental restraint system (SRS). For additional information, refer to
Supplemental Restraint System (SRS) Deactivation and Reactivation
3. WARNING: To reduce the risk of serious personal injury, follow all warnings,
cautions, notes and instructions in the clockspring removal and installation procedure.
Remove the clockspring (14A664). For additional information, refer to
4. Remove the multi-function switch (13K359).
1. Remove the screws.
2. Disconnect the electrical connector.
3. Remove the multi-function switch.
5. Disconnect the ignition switch electrical connector.
1. Remove the bolt.
2. Disconnect the electrical connector.
2003 Mustang Workshop Manual
Section 414-01
in this section.
Section 501-20B
.
.