Ford 2003 Mustang Workshop Manual page 536

11. Repeat Steps 7, 8, 9 and 10 for the LH front disc brake caliper bleeder screw.
Pressure
1. Clean all dirt from and remove the brake master cylinder filler cap and fill the brake master
cylinder reservoir with the specified brake fluid.
2. NOTE: Master cylinder pressure bleeder adapter tools are available from various manufacturers
of pressure bleeding equipment. Follow the instructions of the manufacturer when installing the
adapter.
Install the bleeder adapter to the brake master cylinder reservoir, and attach the bleeder tank
hose to the fitting on the adapter.
3. NOTE: Bleed the longest line first. Make sure the bleeder tank contains enough specified brake
fluid to complete the bleeding operation.
Place a box end wrench on the RH rear bleeder screw. Attach a rubber drain tube to the RH
rear bleeder screw, and submerge the free end of the tube in a container partially filled with
clean brake fluid.
4. Open the valve on the bleeder tank.