SECTION 303-01A: Engine — 3.8L
IN-VEHICLE REPAIR
Timing Chain
Removal
1. Remove the timing cover. For additional information, refer to
2. Remove the camshaft position sensor drive gear.
1. Remove the bolt.
2. Remove the camshaft position sensor drive gear.
3. Rotate the crankshaft (6303) until the timing marks and keyways align.
4. Compress and install a retaining pin to hold the timing chain tensioner (6L266).
5. Remove the camshaft sprocket (6256), the crankshaft sprocket (6306) and the timing chain/belt
(6268) as an assembly.
2003 Mustang Workshop Manual
Engine Front Cover
in this section.