SECTION 303-01A: Engine — 3.8L
IN-VEHICLE REPAIR
Rocker Arm
Removal
CAUTION: If removing more than one rocker arm (6564), mark the components removed
for correct location.
1. Remove the valve covers. For additional information, refer to
RH
in this section.
2. Remove the rocker arm assembly.
Remove the bolt.
Installation
1. Install the rocker arms, tighten the bolts in two stages.
Stage 1: tighten to 5 Nm (44-lb-in).
Stage 2: tighten to 35 Nm (26 lb-ft).
2. Install the valve covers. For additional information, refer to
RH
in this section.
2003 Mustang Workshop Manual
Valve Cover—LH
and
Valve Cover—LH
and
Valve Cover
Valve Cover