Stabilizer Bar - Ford 2003 Mustang Workshop Manual

SECTION 204-02: Rear Suspension
REMOVAL AND INSTALLATION

Stabilizer Bar

Removal
CAUTION: Suspension fasteners are critical parts because they affect performance of vital
components and systems and their failure can result in major service expense. A new part with
the same part number must be installed if installation becomes necessary. If substitution is
necessary, the part must be of the same finish and property class. Torque values must be used
as specified during reassembly to make sure of correct retention of these parts.
1. Raise the vehicle. For additional information, refer to
2. Disconnect the anti-lock brake sensor wires from the brackets.
3. Remove the parking brake cable brackets.
1. Remove and discard the bolts.
2. Remove the parking brake cable brackets.
4. Remove the bolts and the stabilizer bar (5A772). Discard the bolts.
2003 Mustang Workshop Manual
Section 100-02 .