Ford 2003 Mustang Workshop Manual page 607

SECTION 206-05: Parking Brake and Actuation
REMOVAL AND INSTALLATION
Cable and Conduit —Front
Removal
1. CAUTION: If any component in the parking brake system requires repair or if the
rear axle housing (4010) is removed, the cable tension must be released.
Release the cable tension. For additional information, refer to
Release in this section.
2. Disconnect the parking brake rear cables and conduits.
3. Remove the parking brake control nuts.
4. Disconnect the parking brake cable.
2003 Mustang Workshop Manual
Parking Brake Cable Tension