Ford 2003 Mustang Workshop Manual page 1017

9. Install the support bracket.
10. Using the special tool, install the power steering pump pulley.
11. Install the drive belt. For additional information, refer to
12. Install the push rods. For additional information, refer to
13. Install the lower intake manifold. For additional information, refer to
section.
14. Install the LH exhaust manifold. For additional information, refer to
section.
15. Connect the battery ground cable. For additional information, refer to
16. CAUTION: Correct cooling system bleeding is critical for correct engine cooling.
Fill and bleed the engine cooling system. For additional information, refer to
Section 303-05 .
Push Rod in this section.
Lower Intake Manifold
Exhaust Manifold—LH
Section 414-01
Section 303-03A
in this
in this
.
.