18. Align the marks on the cam bolt and the upper suspension arm and bushing, and tighten the
nut.
19. Repeat the two previous steps for the other knuckle.
20. Lower the suspension and remove the jack stands.
21. Apply Anti-Seize Lubricant to the rear brake anti-lock sensors where they contact the axle
housing and install the anti-lock sensors.
Use High Temperature Nickel Anti-Seize Lubricant F6AZ-9L494-AA or equivalent
meeting Ford specification ESE-M12A4-A.
22. Install the brake disc, and the rear disc brake caliper and support bracket assembly. For
additional information, refer to
23. Position the parking brake cable and conduit.
Section 206-04
.