Ford 2003 Mustang Workshop Manual page 541

Hide thumbs Also See for 2003 Mustang:

Table of Contents

13. If the brake disc TIR is still out of specification, measure and record the thickness of the brake

disc. If thickness is sufficient to machine the brake disc to the runout specification, go to Step

14. If the thickness is not sufficient, install a new brake disc and recheck the TIR.

14. NOTE: Brake disc machining must be done with an on-vehicle lathe. Follow the lathe

manufacturer's instructions.

Machine the brake disc if final thickness will not be less than the maximum specification.

Recheck the brake disc runout.

Show Quick Links

Table of Contents