Ford 2003 Mustang Workshop Manual page 372

1. Position the two U-washers on the button end of the axle shaft.
2. Pull the axle shaft outward.
4. NOTE: If a new pinion shaft lock bolt is unavailable, coat the threads with Threadlock and
Sealer EOAZ-19554-AA or equivalent meeting Ford specification WSK-M2G351-A5 prior to
installation.
Install the differential pinion shaft.
1. Align the hole in the differential pinion shaft with the case lock bolt hole.
2. Install a new differential pinion shaft lock bolt.
5. Install the differential housing cover and fill the rear axle with the specified lubrication. For
additional information, refer to
6. Install the rear brake anti-lock sensor. For additional information, refer to
7. Install the rear brakes. For additional information, refer to
8. Install the tire and wheel assembly. For additional information, refer to
9. Lower the vehicle.
Differential Housing Cover in this section.
Section 206-09A
Section 206-04 .
Section 204-04
.
.