4.
CAUTION: Use care not to damage the bleeder screw or front brake disc shield.
Install the disc brake caliper.
1. Hold the guide pins stationary.
2. Install the caliper bolts.
5. Install the wheel and tire assembly. For additional information, refer to
6. Lower the vehicle.
7. Fill the brake master cylinder reservoir with clean High Performance DOT 3 Brake Fluid C6AZ-
19542-AB or equivalent DOT 3 fluid meeting Ford specification ESA-M6C25-A. Install brake
master cylinder filler cap.
8. Inspect brake operation.
Section 204-04
.