Ford 2003 Mustang Workshop Manual page 434

SECTION 205-02C: Rear Drive Axle/Differential — Ford 8.8-Inch IRS
IN-VEHICLE REPAIR
Stub Shaft Pilot Bearing and Seal
Special Tool(s)
Remover, Bearing Cup
308-047 (T77F-1102-A)
Protector, Differential Seal
(Pair)
205-461
Installer, Differential Oil Seal
205-293 (T89P-4850-A)
Adapter for 303-224 (Handle)
205-153 (T80T-4000-W)
Slide Hammer
100-001 (T50T-100-A)
Installer, Needle Bearing
205-288 (T89P-1244-A)
Removal
1. Remove the halfshaft assembly.
The knuckle and halfshaft are removable as an assembly. For additional information,
refer to Axle Housing
knuckle, refer to
2. NOTE: If only removing the inboard CV joint stub shaft pilot bearing housing seal (4B416),
in this section. If it is necessary to remove the halfshaft from the
Section 205-05 .
2003 Mustang Workshop Manual