Ford 2003 Mustang Workshop Manual page 230

4. Remove the bolt and the parking brake cable bracket. Discard the bolt.
Vehicles equipped with a 4.6L 2V engine
5. Remove the stabilizer bar (5A772). For additional information, refer to
section.
All vehicles
6. Support the differential housing with a jack stand.
7. Position the special tool 014-00942 under the rear lower suspension arm and bushing-to-axle
pivot bolt.
8. Remove and discard the pivot bolt and nut.
9. Remove the spring (5560).
1. Slowly lower the arm with the special tool 014-00942.
2. Remove the rear spring and the rear spring insulators (5536).
Installation
Stabilizer Bar in this