8.
CAUTION: Correctly support the power rack and pinion steering gear to avoid
damaging the gear and hoses.
Position the power rack and steering gear out of the way.
1. Remove the nuts and bolts.
2. Position the steering gear so the front suspension lower arm front bolt can be removed.
9. Support the front suspension lower arm with a jack stand inboard of the spring seat.
10. NOTE: Note position of the front coil spring (5310) in the lower arm spring seat. It must be
installed in the same position.
Using the special tool, compress the spring until it is loose in the spring insulator (5415).
11. Remove the front suspension lower arm pivot nuts and bolts.