Ford 2003 Mustang Workshop Manual page 674

SECTION 206-09A: Anti-Lock Control — Rear
REMOVAL AND INSTALLATION
Sensor —Rear
Removal
1. Remove the rear passenger seat.
2. Disconnect the rear anti-lock brake sensor electrical connector.
3. Raise and support the vehicle. For additional information, refer to
4. Remove the rear anti-lock brake sensor harness from the floor pan.
5. Remove the anti-lock brake sensor harness bracket bolt.
6. NOTE: The sensor may be siezed to the axle. Use Rust Penetrant and Inhibitor F2AZ-19A501-
A meeting Ford specification ESR-M99C56-A to loosen the sensor for removal.
Remove the rear anti-lock brake sensor.
2003 Mustang Workshop Manual
Section 100-02 .