Ford 2003 Mustang Workshop Manual page 1013

SECTION 303-01A: Engine — 3.8L
IN-VEHICLE REPAIR
Cylinder Head LH
Special Tool(s)
Remover, Power Steering
Pump Pulley
211-016 (T69L-10300-B)
Installer, Power Steering Pump
Pulley
211-009
Material
Item
SAE 5W-20 Premium Synthetic
Blend Motor Oil
XO-5W20-QSP or equivalent
Removal
1. Disconnect the battery negative cable. For additional information, refer to
2. Drain the engine cooling system. For additional information, refer to
3. Remove the LH exhaust manifold. For additional information, refer to
this section.
4. Remove the lower intake manifold. For additional information, refer to
this section.
5. Remove the push rods. For additional information, refer to
6. Remove the drive belt. For additional information, refer to
7. Using the special tool, remove the power steering pump pulley.
Specification
WSS-M2C153-
H
2003 Mustang Workshop Manual
Section 414-01
Section 303-03A
Exhaust Manifold—LH
Lower Intake Manifold
Push Rod in this section.
Section 303-05 .
.
.
in
in