Ford 2003 Mustang Workshop Manual page 759

SECTION 211-02: Power Steering
REMOVAL AND INSTALLATION
Pulley —CIII Pump
Special Tool(s)
Removal
1. Remove the drive belt. For additional information, refer to
2. Raise and support the vehicle. For additional information, refer to
3. Using the special tool, remove the pulley.
Inspect the pulley for paint marks in the web area near the hub. If there are two paint
marks, discard and install a new pulley. If there is no paint or one paint mark, use a paint
pencil to mark the web area of the pulley near the hub.
Installation
1. Using the special tool, install a new pulley.
Pump Pulley Replacer
211-185 (T91P-3A733-A)
Pump Pulley Remover
211-016 (T69L-10300-B)
2003 Mustang Workshop Manual
Section 303-05 .
Section 100-02 .