Table of Contents
Advertisement
Replacement
NOTE: Make sure the plastic pads on the Lower Chute fit in the track before pushing it in.
1.
To install, carry out the removal steps in reverse order.
Initial Issue
WorkCentre 5335 Family Service Documentation
REP 19.8 HCF Nudger Bracket/Nudger Lever/Torsion
Spring
Parts List on
Removal
1.
Switch off the power and disconnect the power cord.
2.
Remove the HCF Feed Shaft
3.
Disassemble the Feed Shaft by removing (4) E-Rings and unscrewing the Nudger Sup-
port that retains the Torsion Spring.
Replacement
1.
Install replacement parts.
2.
Carry out the removal steps in reverse order.
07/2011
4-185
BUS Updated 12/2011
PL 10.4
(REP
19.6)
Repairs & Adjustments
REP 19.7, REP 19.8
Advertisement
Table of Contents
