Controller Asic Fail Rap - Xerox VersaLink B7025 Service Manual

016-355, 016-356 Controller ASIC Fail RAP

016-355 Cont IO ASIC diagnostic fail.
016-356 Cont video ASIC diagnostic fail.
Procedure
Ensure that the electricity to the machine is switched off while performing tasks that do
not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause
death or injury. Moving parts can cause injury.
Perform the steps that follow:
1. Switch off, then switch on the machine,
2. Ensure that all connectors on the ESS PWB,
Ensure all surface mounted modules are securely connected.
3. Reload the software, GP 4.
4. If the fault persists, install a new ESS PWB,
Launch Issue
Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
WARNING
GP 10.
PL 3.10 Item 6 are securely connected.
PL 3.10 Item 6.
016-357 Controller EP Communication Fail RAP
016-357 Controller to EP-controller communication fail.
Procedure
Ensure that the electricity to the machine is switched off while performing tasks that do
not need electricity. Refer to
death or injury. Moving parts can cause injury.
Perform the steps that follow:
1. Switch off, then switch on the machine,
2. Ensure that all connectors on the ESS PWB,
Ensure all surface mounted modules are securely connected.
3. Reload the software, GP 4.
4. Perform the OF2 Special Boot Modes RAP.
5. If the fault persists, install a new ESS PWB,
April 2017
2-121
WARNING
GP 10. Disconnect the power cord. Electricity can cause
GP 10.
PL 3.10 Item 6 are securely connected.
PL 3.10 Item 6.
Status Indicator RAPs
016-355, 016-356, 016-357