Clear Counters Vrrp - Dell Z9500 Command Reference Manual

Hide thumbs Also See for Z9500:

Table of Contents

This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

The given password is encrypted by the system and the show config displays an

encrypted text string for any of the encrypted typed used.

clear counters vrrp

Clear the counters maintained on VRRP operations.

clear counters vrrp [vrrp-id] [ipv6] [vrf vrf-name]

vrf vrf-name

EXEC Privilege

This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Introduced on the Z9500.

Introduced on the S4820T.

Introduced on the Z9000.

Introduced on the S4810.

Introduced on the S-Series.

Introduced on the C-Series.

Introduced on the E-Series.

(OPTIONAL) Enter the number of the VRRP group ID. The

range is from 1 to 255.

(OPTIONAL) Enter the keyword ipv6 to clear counters from

the IPv6 VRRP group.

(OPTIONAL) Enter the keyword vrf and then the name of

the VRF to clear counters that are maintained on the VRRP

operations corresponding to that VRF.

Introduced on the S6000-ON.

Added support for VRF.

Virtual Router Redundancy Protocol (VRRP)