Vlt-Peer-Mac Transmit - Dell Z9500 Command Reference Manual

Version
9.4(0.0)
Usage In a square VLT topology with only one link connecting remote peers, a node must
Information stop sending its VLT peer MAC address ("vlt-peer-mac transmit" enabled) when the
VLT peer is down. If you configure this time out interval, it will keep sending its
peer's MAC address until the timer expires.
Example
Dell(conf-vlt-domain-proxy-gw-lldp)# peer-timeout 5

vlt-peer-mac transmit

Configures a peer to sent its VLT peer's MAC address along with its LLDP TLV.
Z9500
Syntax
[no] vlt-peer-mac transmit
Command VLT DOMAIN PROXY GW LLDP
Modes
Command
Version
History
9.5(0.1)
9.4(0.0)
Usage In a square VLT topology with only one link connecting remote peers, if you
Information configure this command, any node has to send its VLT peer's MAC address along
with its own MAC address to the remote VLT domain. By default, a node will send
only its own MAC address to the remote VLT domain. This parameter is applicable
for an LLDP proxy gateway configuration.
Example
Dell(conf-vlt-domain-proxy-gw-lldp)# vlt-peer-mac transmit
VLT Proxy Gateway
Description
Introduced on the S4810, S4820T, S6000, Z9000, and MXL
Switch.
Description
Introduced on the Z9500.
Introduced on the S4810, S4820T, S6000, Z9000, and MXL
Switch.
1879