Accessing The Quick Setup Procedure - RADVision Scopia XT4000 Series User Manual

Accessing the Quick Setup Procedure

Access the quick setup procedure on your endpoint to define basic settings for your Scopia XT
Series, such as the system's language, the name of this endpoint, and network settings. Follow
the tasks of the quick setup procedure in the order they are presented.
This is relevant for both new installations, and also after restoring default settings and re-
installing software.
Note
Your system administrator might already have set these parameters for you. If your
administrator set up PIN protection, you need the PIN number before continuing with the
configuration.
Procedure
Step 1
Step 2
RADVISION | User Guide for Scopia XT4000 Series Version 3.1.1
•
Accessing the Quick Setup Procedure .................................................... page 18
•
Remotely Setting the System Name and Language ..................................... page 25
The quick setup wizard automatically appears when you turn the XT Codec Unit on for the
first time.
If the quick setup wizard is not displayed automatically, select Configure > Quick Setup from
the Main Menu.
Figure 2-6
The quick setup wizard guides you through these basic configuration tasks:
Accessing the Quick Setup
Getting Started | 18