Accessing The Quick Setup Procedure - RADVision Scopia XT Series User Manual

If the monitor you are using requires adjustment, you cannot remotely set the image on the
monitor; this must be done from the endpoint itself.
Navigation
•

Accessing the Quick Setup Procedure

•
Remotely Setting the System Name and Language
Accessing the Quick Setup Procedure
About this task
Access the quick setup procedure to define basic settings for your Scopia XT Series, such as the
system's name, language, and network settings. Follow the tasks of the quick setup procedure in the
order they are presented.
This is relevant for both new installations, and also after restoring default settings and re-installing
software.
You can do this procedure from the endpoint itself or from the XT Series web interface.
Before you begin
Your system administrator might already have set these parameters for you and customized certain
features described in this guide to suit the environment of your company. If your administrator set up PIN
protection, you need the PIN number before continuing with the configuration.
Procedure
1. The quick setup wizard automatically appears the first time you access the Scopia XT Series,
User Guide for Scopia XT Executive Version 3.2
either by turning on the XT Codec Unit or logging in to the web interface.
If the quick setup wizard is not displayed automatically when you first turn on the XT Codec
Unit, select Configure > Quick Setup from the Main Menu.
on page 30
on page 40
Getting Started | 30