Accessing The Quick Setup Procedure - RADVision Scopia XT Executive User Manual

Note
Your system administrator might already have set these parameters for you and customized
certain features described in this guide to suit the environment of your company. If your
administrator set up PIN protection, you need the PIN number before continuing with the
configuration.
You can define these settings as follows:
For details on performing basic configuration, see:

Accessing the Quick Setup Procedure

Access the quick setup procedure on your endpoint to define basic settings for your Scopia XT
Series, such as the system's language, the name of this endpoint, and network settings. Follow
the tasks of the quick setup procedure in the order they are presented.
This is relevant for both new installations, and also after restoring default settings and re-
installing software.
Note
Your system administrator might already have set these parameters for you. If your
administrator set up PIN protection, you need the PIN number before continuing with the
configuration.
Procedure
Step 1
RADVISION | User Guide for Scopia XT Executive Version 3.1.1
•
Following the quick setup procedure on the Scopia XT Series endpoint.
We recommend this method to quickly start using your Scopia XT Series, since the quick
setup wizard includes only the basic required settings.
•
Remotely defining the settings from the Scopia XT Series web interface (see
Scopia XT Series Web Interface" on page
Your administrator may define some settings remotely, such as for the network or
gatekeeper (see the Scopia XT Series Installation Guide for details). The quick setup is
available from the web interface if you have not already completed the procedure from
the endpoint.
If the monitor you are using requires adjustment, you cannot remotely set the image on
the monitor; this must be done from the endpoint itself.
•
Accessing the Quick Setup Procedure .................................................... page 26
•
Remotely Setting the System Name and Language ..................................... page 36
The quick setup wizard automatically appears when you turn the XT Codec Unit on for the
first time.
If the quick setup wizard is not displayed automatically, select Configure > Quick Setup from
the Main Menu.
14).
"Accessing
Getting Started | 26