Setting The User Interface Language; Using The Quick Setup Wizard; Setting The Country And Language; Adjusting The Image Size - RADVision Scopia XT1000 Administrator's Manual

Setting the User Interface Language

There are four ways of setting the language of the interface:

Using the Quick Setup Wizard

A quick setup wizard will assist you in this first approach to the system.
The quick setup will show more pages, allowing you to set some useful parameters for basic
system management. Your system administrator might already have set these parameters for you.
You might also use the quick setup wizard after:

Setting the Country and Language

Procedure
Step 1
Use the arrow keys to select the Country in which the system is located and the preferred GUI
Language.
Step 2
Press

Adjusting the Image Size

If the display appears cropped on your monitor, you may need to adjust the image size the system
sends you.
For an optimal video experience, some heuristic suggestions might help to configure the monitor:
RADVISION | Administrator Guide for SCOPIA XT1000 Version 2.0
•
When enabling the software license
•
In Page 1/6 of the Quick Setup Wizard
•
In Administrator settings > System > Location > General
•
In Settings > User settings > General.
•
Restoring default settings
•
Re-installing software
Next to access the next display.
'Initial Configuration' | 14