Jam Code - Canon iR5055 Series Service Manual

Chapter 16
Cause
# 841
In relation to an attempt for transmission for e-mail/i-fax, there is no coding
algorithm that may be used in common with the mail server.
# 842
In relation to an attempt for transmission of e-mail/i-fax, a request has been
made for the use of a client certificate by the mail server.
# 843
The time used by the KDC (key distribution center) server and the time used
by the machine are different significantly.
# 847
The memory of the Box has been used up, not permitting the storage of the
received file in the fax box.
# 851
The remaining memory of the machine is running short.
There are more than 100 files in the specified box, not permitting additional
storage.
# 852
The main power switch has been turned off while a job is being executed,
causing an error.
# 899
The transmission of e-mail or i-fax has ended. However, the transmission
has gone through multiple servers, and there is no way of finding out
whether the transmission has reached the target.
# 995
The reservation for the transmission has been cancelled.

16.4 Jam Code

16.4.1 Jam Code (machine proper)
iR5065 / iR 5055 / iR5075 / iR5075N / iR5065N / iR5055N
Code Jam
01xx delay jam
02xx stationary jam
0Axx residual jam
0Bxx cover open jam
Code Sensor
xx01 registration paper sensor
xx02 write check sensor
xx03 vertical path 1 paper sensor
xx04 vertical path 2 paper sensor
xx05 vertical path 3 paper sensor
xx06 vertical path 4 paper sensor
xx07 right deck pull-off sensor
xx08 left deck pull-off sensor
xx0B right deck retry sensor
16-24
Remedy
1. Set 'SSL' to 'OFF' as part of the network settings under system control settings (user
mode).
2. Add a coding algorithm that may be used in common (mail server settings).
1. Set 'SSL' to 'OFF' as part of the network settings under the system control settings
(user mode).
2. Change the mail server settings so that it will not request a client certificate.
1. Correct the time as part of the date/time settings under the system control settings
(user mode).
2. Correct the time used by the KDC (key distribution center) server.
Remove unnecessary files from the fax box or the system box.
Check the remaining memory of the machine; then, remove unnecessary files for the
Box.
Remove unnecessary files from the specified box.
Check to see that the main power switch is on; as necessary, try once again.
1. Check with the target to see if the transmission has arrived.
2. Check to see if an error notice has arrived.
As necessary, start over.
T-16-8
T-16-9
Notation
PS29
PS28
PS24
PS25
PS26
PS27
PS32
PS33
PS19
0015-5640