Hardware Manual
3. This procedure is complete.
How to Cable a T1100 AS Frame
WARNING: Verify that all breakers are set to the OFF (O) position. Verify that all
Power distribution panel circuit breakers are set to OFF. Be sure the T1100 AS chassis
power switch is set to OFF.
Verify that the cables already attached are connected correctly. (The T1100 AS hardware system
frame is shipped with most of the cables already attached.) Complete any other required cable
connections.
To determine the cables used and how to connect them, refer to the
lists each cable, its quantity, length, how it is used, and a diagram of how to connect it.
910-2969-001 Revision K, June 2009
How to Install aT1100 AS Frame
interconnect
diagram, which
67