Table of Contents
Advertisement
Out of Band Management Card
The out of band management (OOBM) card provides "lights-out" management
capabilities for the T1100 AS. The card provides multiple methods to connect to
the T1100 AS serial console port, both locally and remotely. The card also provides
a basic management interface that can be used to debug and control the host. The
primary function of the OOBM is provide connectivity to a host system to remote
users. While the card is located on the T1100 AS PCI bus, the card relies only on
that bus for power, and thus is largely independent of the software running on
the T1100 AS. Therefore, the card can be used to control and debug the host at
times when the host is experiencing difficulty, or is locked up, and other means of
connecting directly to the host do not work.
Electrical Features
The Tekelec 1100 AS platform offers the following standard electrical features:
• Input power according to Network Equipment Building System (NEBS)
requirements in accordance with typical telecommunications applications
— DC Input: -48V@12.5A/600W
— AC Input: 110VAC@5.5A (240VAC@2.5A)/600W
NOTE: The T1100 AC power supply unit automatically compensates
for 110V or 240V AC operation.
• Includes short-circuit protections and safety precautions in accordance with
common standards
Mechanical Design
The Tekelec 1100 AS mechanical design meets all applicable NEBS requirements
and is designed to protect all of the active components. The design has efficient
component cooling using low-impedance air paths, and its compact size allows
multiple units to be configured in a frame with zero top and bottom clearance
when stacked.
Mechanical Maintenance Features
The Tekelec 1100 AS hardware has been designed for easy maintenance. The
following components are field-replaceable units (FRUs):
• Fans
• Fan filters
• Disk drives
• CD/DVD drive assembly
A-4
T1100 AS Hardware Feature Information
Preliminary
910-2969-001 Revision H, February 2007
Advertisement
Table of Contents
