Procedure 3: Connection To Mcu - Polycom RMX 1500 Getting Started Manual

Procedure 3: Connection to MCU

5
When the Product Activation Key is displayed, write it down or copy it
for later pasting into the Activation Key field of the Product Activation
dialog box.
If Windows7™ is installed on the workstation, Protected Mode must be
disabled before connecting to the MCU running Version 7.0 software.
For more information see "Windows 7™ Security Settings" on page 1-11.
1
Start the RMX Web Client application on the workstation.
a In the browser's address line, enter the IP address of the Control
Unit in the format:
defined in the USB key.
b Click Enter.
The RMX Web Client Login screen is displayed.
Once the connection with the RMX is established, you can remove the USB key
from the RMX.
Polycom RMX 1500/2000/4000 Getting Started Guide
http://<Control Unit IP Address>,
as
Link to
RMX
Manager
Installer
2-23