Honda VT750C2 Shadow Spirit Service Manual page 232

CLUTCH/GEARSHIFT LINKAGE
Be
careful not to
Clean the mating surfaces of the right crankcase and
damage the mating
cover.
surfaces.
Apply liquid sealant to the right crankcase cover
mating surface.
Connect the clutch cable.
Install the right crankcase cover, clutch cable holder
and tighten the bolts in a crisscross pattern in sev­
eral steps.
Install the oil seal rubber to the clutch cover with its
smail flange side facing up.
Install the clutch cover and tighten the bolts to the
specified torque.
TORQUE:-10 N·m (1.0 kgf·m, 7 Ibf·ft)
Fill the .crankcase with the recommended engine oil
(page 4-12).
JI~
- - ­
11-23