Disassembled View; Disassembly; Inspection And Repair; Reassembly - Isuzu 1999 RODEO Workshop Manual

5C–58 POWER–ASSISTED BRAKE SYSTEM

Disassembled View

Legend
(1) Boot
(2) Piston Assembly
(3) Piston Cup
(4) Return Spring
(5) Bleeder
(6) Wheel Cylinder

Disassembly

1. Remove boot (1) and piston assembly (2).
2. Remove piston cup (3) from piston assembly (2).
3. Remove return spring (4) and bleeder (5) from wheel
cylinder (6).

Inspection and Repair

1. Make necessary parts replacement if wear, damage,
corrosion or any other abnormal condition are fond
through inspection.
Check the following parts;
f Wheel cylinder body
f Cylinder bore
f Piston
f Return spring
f Bleeder
NOTE: Replace the piston cups and boots each time the
wheel cylinder is overhauled. Discard these used rubber
parts and replace with new ones.

Reassembly

1. Lubricate the cylinder bore with clean rubber grease.
305RS006
2. Install bleeder (5) to wheel cylinder (6).
Torque: 10 N·m (8 lb ft)
305RS007
305RS008