Inspection; Installation - Isuzu 1999 RODEO Workshop Manual

Hide thumbs Also See for 1999 RODEO:

Table of Contents

4. Remove heater unit.

f Refer to Heater Unit in this section.

5. Remove duct.

6. Remove case (Mode control) and do not remove link

unit at this step.

7. Remove case (Temperature control) separate two

halves of core case.

8. Remove heater core (1).

HEATING, VENTILATION AND AIR CONDITIONING (HVAC) 1A–15

9. Pull out the mode door while raising up the catch of

Inspection

Check for foreign matter in the heater core, stain or the

core fin defacement.

To install, follow the removal steps in the reverse order,

noting the following point:

1. Check that each mode door operates properly.

the door lever.

Show Quick Links

Table of Contents

Do you have a question about the 1999 RODEO and is the answer not in the manual?