Heater Mode Control Link Unit 1A-16; Disassembled View - Isuzu 1999 RODEO Workshop Manual

1A–16 HEATING, VENTILATION AND AIR CONDITIONING (HVAC)

Disassembled View

Legend
(1) Case (Mode Control)
(2) Heater Unit
(3) Mode Sub-lever
Removal
1. Disconnect the battery ground cable.
2. Drain engine coolant.
3. Discharge and recover
conditioning)
f Refer to Refrigerant Recovery in this section.
4. Remove heater unit.
f Refer to Heater Unit in this section.
5. Remove the case (Mode control) from heater unit.
6. Remove washer and the mode main lever.
7. Remove rod.
8. Press the tab of the sub-lever inward, and take out the
sub-lever.
Heater Mode Control Link Unit
refrigerant (with air
(4) Clip
(5) Door Lever
(6) Rod
(7) Washer and Mode Main Lever
860RW002
860RS006