Isuzu 1999 RODEO Workshop Manual page 489

5C–52 POWER–ASSISTED BRAKE SYSTEM
5. Apply special grease (approximately 1g) to the piston
and attach the dust boot to the piston and caliper.
Insert the dust boot ring into the dust boot.
6. Install guide bolt and lock bolt dust boot.
7. Install the dust boot on the support bracket after
applying special grease (Approx. 1g) onto the dust
boot inner surface. Also apply special grease onto
the lock bolt and guide bolt setting hole of the support
bracket.
302RS019
8. Install lock bolt and guide bolt and tighten the bolt to
the specified torque.
Torque: 44 N·m (32 lb ft)
302RS020
302RS021