Isuzu 1999 RODEO Workshop Manual page 482

3. Use adjustable pliers to bottom the piston into the
caliper bore. Be careful not to damage the piston dust
boot and do not damage the flexible hose by twisting
or pulling it. Install caliper assembly.
Set caliper assembly in place.
POWER–ASSISTED BRAKE SYSTEM
4. Install lock bolt (5) and tighten the bolt to the specified
torque.
Torque: 44 N·m (32 lb ft)
5. Install wheel and tire assembly, referring to "Wheels
and Tires System" in Section 3E.
6. Pump the brake pedal several times to make sure that
the pedal is firm. Check the brake fluid level in the
reservoir after pumping the brakes.
306RW005
302RS008
5C–45
306RW006